Thermally Modified Wood Siding: Durable, Eco - friendly & Stylish

Installing wood siding, especially high - quality thermally modified wood siding from Fujian Qinchao Wood Technology Co., Ltd., requires careful planning and execution. First, prepare the surface by ensuring it is clean, dry, and free of any debris or protrusions. Install a weather - resistant barrier, such as building paper or house wrap, over the exterior walls to prevent moisture from entering the building. Start the installation from the bottom of the wall, working your way up. For lap siding, which is a common type, overlap each board by at least 1 - 2 inches to ensure proper water runoff. Use corrosion - resistant nails or screws to attach the siding to the wall studs, spacing them evenly according to the manufacturer's recommendations. When installing corner boards, make sure they are plumb and square to create a neat and professional look. For vertical siding or board and batten styles, similar principles apply, but the installation techniques may vary slightly. Take care to cut the siding to the correct length, leaving a small gap at the ends to allow for expansion and contraction. Throughout the installation process, regularly check for level and alignment to ensure a straight and even finish. After installation, caulk any joints or gaps to further seal the siding and protect against moisture infiltration.